Double-click the LS-DYNA component icon 
.
The LS-DYNA Component Editor appears.
In the LS-DYNA Component Editor, click the Input tab.
Click the Material Property subtab.
The Basic subtab appears displaying
the Material IDs selected while configuring the Prepare tab.
You can select the following parameters for each Mat_ID:
- Mass density
- Young's modulus
- Poisson's ratio
Select the parameters by doing any of the following:
| Option |
Description |
|---|
| Click the check box |
Select an individual parameter. |
| All Check |
Select all the parameters. |
| All Uncheck |
Clear all the selected parameters. |
Add the selected parameters to the Parameter area.
Click 
to add the selected parameters to the Parameter area.
Click 
to remove the selected parameters from the Parameter area.
The parameters added to the
Parameter area can be used with your Isight model.
If desired, edit the parameter value.
Click the Advance tab.
You can select the following parameters for each Mat_ID:
- C
- P
- LCSS
- LCSR
- LCID
- SIGY
- ETAN
- FAIL
- EPS
- EPSScale
- ES
- ESScale
Select the parameters by doing any of the following:
| Option |
Description |
|---|
| Click the check box |
Select an individual parameter. |
| All Check |
Select all the parameters. |
| All Uncheck |
Clear all the selected parameters. |
If desired, edit the parameter value.
Add the selected parameters to the Parameter area.
Click to add the selected parameters to the Parameter area.
Click to remove the selected parameters from the Parameter area.
The parameters added to the
Parameter area can be used with your Isight model.
If desired, edit the parameter value.
Click 
to move the selected parameter up in the table, or click 
to move the selected parameter down in the table.