Configuring the Technique and Technique Options

For control and noise factors, you can use the Technique subtab to select the technique that you want to use. In addition, you can set the tuning parameters associated with the technique.

You can add DOE techniques to the Taguchi Robust Design component by publishing new DOE technique plug-ins to the library. For more information, see Creating a Plug-In in the Isight Development Guide.

  1. Double-click the Taguchi Robust Design component icon .

    The Taguchi Robust Design Component Editor appears.

  2. From the Taguchi Robust Design Component Editor, click the tab for the type of factor you want to set: Control or Noise.

  3. In the Technique list, select the technique.

    For more detailed information on these techniques, see About the DOE Techniques.

    The technique’s options appear in the Technique Options area. Information about the technique appears in the Technique Description area on the right side of the tab.

  4. Set the Technique Options.

    For more information about using the options available, see Configuring the Techniques.

  5. If desired, map these settings to a parameter. For more information, see Mapping Options and Attributes to Parameters.

  6. Click OK to save your changes and to close the Taguchi Robust Design Component Editor.