The following commands are available:
- deletestation
-
Removes a shutdown station from the list of stations.
- name:<station_name>
-
Specify the name of the station that will be deleted.
- restartstation
-
Stops and restarts and running station. You cannot start
a station that was stopped using the stopstation command.
- name:<station_name>
-
Specify the station that will be restarted.
- name:*
-
Restart all stations.
Note:
There are restrictions and limitations for using this command. For more
information, refer to the SIMULIA Execution Engine Installation and Configuration Guide.
- stationstatus (or status)
-
Displays status information about stations.
- station:<name>
-
Display information for one or more stations. If the name is omitted,
all stations are listed.
- activeonly:<yes|no>
-
Specify whether or not only active stations will be shown.
If no arguments are given, all stations connected to the SIMULIA Execution Engine
are listed.
- stopstation
-
Shuts down the specified station. You cannot start a stopped station from fipercmd.
- name:<station_name>
-
Specify the station that will be stopped.
- name:*
-
Stop all stations.
|