Defining an equation of state

You can use the Edit Material dialog box to define a hydrodynamic material model in which the material's volumetric strength is determined by an equation of state. For more information, see Equation of state.

  1. From the menu bar in the Edit Material dialog box, select MechanicalEos.

    (For information on displaying the Edit Material dialog box, see Creating or editing a material.)

  2. Click the arrow to the right of the Type field, and select the type of equation of state that you want to define:

  3. If you selected Ideal Gas in Step 2, enter the following data in the Data table:

    Gas Constant

    Gas constant, R. (Units of JM−1K−1.)

    Ambient Pressure

    The ambient pressure, pA (Units of FL−2).

    For detailed information on how to enter data, see Entering tabular data.

  4. If you selected JWL in Step 2, enter the following data in the Data table:

    Detonation Wave Speed

    Detonation wave speed, Cd. (Units of LT−1.)

    A and B

    Material constants A, and B. (Units of FL−2.)

    omega, R1, and R2

    Material constants ω, R1, and R2. (Dimensionless.)

    Detonation Energy Dens

    Detonation energy density, E0. (Units of JM−1.)

    Pre-deton Bulk Modulus

    Pre-detonation bulk modulus, Kpd. (Units of FL−2.)

    For detailed information on how to enter data, see Entering tabular data.

  5. If you selected Us-Up in Step 2, enter the following data in the Data table:

    c0

    Reference sound speed, c0. (Units of LT−1.)

    s

    Slope of the Us − Up curve, s. (Dimensionless.)

    Gamma0

    Grüneisen ratio, Γ0. (Dimensionless.)

    For detailed information on how to enter data, see Entering tabular data.

  6. If you selected Tabular in Step 2, enter the following data in the Data table. The volumetric strain values must be arranged in descending order (that is, from the most tensile to the most compressive states).

    f1

    f1. (Units of FL−2.)

    f2

    f2. (Dimensionless.)

    epsilon_vol

    Volumetric strain εvol. (Dimensionless.)

    For detailed information on how to enter data, see Entering tabular data.

  7. If you selected Ignition and growth in Step 2, see Defining an ignition and growth equation of state” for detailed instructions.

  8. If you selected JWL in Step 2, select Detonation Point from the Suboptions menu to define detonation points for the explosive material. For detailed instructions, see Defining detonation points for an explosive material.”

  9. If you selected Us-Up or Tabular in Step 2, you can select Eos Compaction from the Suboptions menu to specify plastic compaction behavior for a ductile porous material. For detailed instructions, see Defining plastic compaction behavior for an equation of state.”

  10. Click OK to close the Edit Material dialog box. Alternatively, you can select another material behavior to define from the menus in the Edit Material dialog box (see Browsing and modifying material behaviors, for more information).