Creating a Connection Profile

If you have not already created a connection profile during the installation of the SIMULIA Execution Engine, you may need to do so now.

If you have existing connection profiles from a previous release of the SIMULIA Execution Engine, you cannot use these old profiles; they must be deleted and recreated.

  1. Perform one of the following actions:

    • Windows: Click the Start button, point to All Programs / SIMULIA Execution Engine x.x, and click Edit Logon Profile.

    • Linux: Navigate to following directory and execute the editcpr file.

      <see_install_dir>/<os_dir>/code/bin/

    The Profile Editor dialog box appears.

  2. In the Profile name text box, type the name of the profile.

    This name will appear on the Connection list when connecting to the SIMULIA Execution Engine.

  3. From the Server type list, select Weblogic Server 12.

    Additional options appear when this option is selected.

  4. In the Server name text box, specify the name of the computer running the SIMULIA Execution Engine.

    Important: If you will be using LSF with your SIMULIA Execution Engine, do not specify the server using its fully qualified domain name. For example, you should type seecomputer, not seecomputer.yourcompany.com.

  5. Do one of the following:

    • If you are using a multiple-server deployment, change the port number in the corresponding text box to match the Listen Port setting of the managed server you created to host the SIMULIA Execution Engine. This port number was specified in Creating a Managed Server Using the ServerTemplate.

    • If you are using a single-server deployment, specify the Listen Port setting for the Administration Server. The default port number is usually 7001. For more information on the port numbers used by your network, contact your local system administrator.

  6. From the File menu, select Save As.

  7. Specify a name and location for the connection profile.

    All connection profiles should be stored in the top level of the SIMULIA Execution Engine installation directory.

  8. Click Save.

    The connection profile is saved.

  9. Close the Profile Editor dialog box.

    Tip: It is recommended that you make a copy of the resulting .cpr file (saved as servername.cpr) and make it available for anyone who wants to connect to the SIMULIA Execution Engine.