Abaqus keyword browser table

Table 1. Keyword browser table.
Keyword	Purpose	Module	Products
ACOUSTIC CONTRIBUTION	Request the computation of the acoustic contribution factors for the linear, eigenmode-based, steady-state dynamic procedure.	Unsupported	Abaqus/Standard
ACOUSTIC FLOW VELOCITY	Specify flow velocities as a predefined field for acoustic elements.	Unsupported	Abaqus/Standard
ACOUSTIC MEDIUM	Specify an acoustic medium.	Property module	Abaqus/Standard Abaqus/Explicit
ACOUSTIC WAVE FORMULATION	Specify the type of formulation in acoustic problems with incident wave loading.	Model attribute	Abaqus/Standard Abaqus/Explicit
ACTIVATE ELEMENTS	Activate elements within a step.	Unsupported	Abaqus/Standard
ADAPTIVE MESH	Define an adaptive mesh domain.	Supported in the Step module; only one adaptive mesh domain can be defined per step.	Abaqus/Standard Abaqus/Explicit
ADAPTIVE MESH CONSTRAINT	Specify constraints on the motion of the mesh for an adaptive mesh domain.	Displacement and velocity adaptive mesh constraints are supported in the Step module.	Abaqus/Standard Abaqus/Explicit
ADAPTIVE MESH CONTROLS	Specify controls for the adaptive meshing and advection algorithms.	Step module	Abaqus/Standard Abaqus/Explicit
ADAPTIVE MESH REFINEMENT	Activate adaptive mesh refinement in an Eulerian domain.	Unsupported	Abaqus/Explicit
ADJUST	Adjust user-specified nodal coordinates to lie on a given surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
AMPLITUDE	Define an amplitude curve.	Amplitude toolset; bubble loading is not supported. Similar functionality is available in the Interaction module.	Abaqus/Standard Abaqus/Explicit
ANISOTROPIC HYPERELASTIC	Specify anisotropic hyperelastic properties for approximately incompressible materials.	Property module	Abaqus/Standard Abaqus/Explicit
ANNEAL	Anneal the structure.	Step module	Abaqus/Explicit
ANNEAL TEMPERATURE	Specify material properties for modeling annealing or melting.	Property module	Abaqus/Standard Abaqus/Explicit
AQUA	Define fluid variables for use in loading immersed beam-type structures.	Unsupported	Abaqus/Aqua
ASSEMBLY	Begin an assembly definition.	Assembly module	Abaqus/Standard Abaqus/Explicit
ASYMMETRIC-AXISYMMETRIC	Define areas of integration for contact elements used with CAXAn or SAXAn elements.	Unsupported	Abaqus/Standard
AXIAL	Used to define the axial behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
BASE MOTION	Define the base motion for linear, eigenmode-based, dynamic procedures.	Unsupported	Abaqus/Standard
BASELINE CORRECTION	Include baseline correction.	Amplitude toolset	Abaqus/Standard
BEAM ADDED INERTIA	Define additional beam inertia.	Unsupported	Abaqus/Standard Abaqus/Explicit
BEAM FLUID INERTIA	Define additional beam inertia due to immersion in a fluid.	Property module	Abaqus/Standard Abaqus/Explicit
BEAM GENERAL SECTION	Specify a beam section when numerical integration over the section is not required.	General beam sections with linear response are supported in the Property module.	Abaqus/Standard Abaqus/Explicit
BEAM SECTION	Specify a beam section when numerical integration over the section is required.	Property module	Abaqus/Standard Abaqus/Explicit
BEAM SECTION GENERATE	Generate beam section properties for a meshed cross-section.	Unsupported	Abaqus/Standard
BEAM SECTION OFFSET	Define an offset for the beam cross-section origin.	Unsupported	Abaqus/Standard
BIAXIAL TEST DATA	Used to provide biaxial test data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
BLOCKAGE	Control contacting surfaces for blockage.	Unsupported	Abaqus/Explicit
BOND	Define bonds and bonding properties.	Unsupported	Abaqus/Explicit
BOUNDARY	Specify boundary conditions.	Load module; fluid cavity pressure and generalized plane strain boundary conditions are not supported.	Abaqus/Standard Abaqus/Explicit
BRITTLE CRACKING	Define brittle cracking properties.	Property module	Abaqus/Explicit
BRITTLE FAILURE	Specify brittle failure criterion.	Property module	Abaqus/Explicit
BRITTLE SHEAR	Define the postcracking shear behavior of a material used with the brittle cracking model.	Property module	Abaqus/Explicit
BUCKLE	Obtain eigenvalue buckling estimates.	Step module	Abaqus/Standard
BUCKLING ENVELOPE	Define a nondefault buckling envelope for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
BUCKLING LENGTH	Define buckling length data for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
BUCKLING REDUCTION FACTORS	Define buckling reduction factors for buckling strut response of frame elements with PIPE sections.	Unsupported	Abaqus/Standard
BULK VISCOSITY	Modify bulk viscosity parameters.	Step module	Abaqus/Explicit
C ADDED MASS	Specify concentrated added mass in a FREQUENCY step.	Unsupported	Abaqus/Aqua
CAP CREEP	Specify a cap creep law and material properties.	Property module	Abaqus/Standard
CAP HARDENING	Specify Drucker-Prager/Cap plasticity hardening.	Property module	Abaqus/Standard Abaqus/Explicit
CAP PLASTICITY	Specify the Modified Drucker-Prager/Cap plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CAPACITY	Define the molar heat capacity at constant pressure for an ideal gas species.	Interaction module	Abaqus/Explicit
CAST IRON COMPRESSION HARDENING	Specify hardening in compression for the gray cast iron plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CAST IRON PLASTICITY	Specify plastic material properties for gray cast iron.	Property module	Abaqus/Standard Abaqus/Explicit
CAST IRON TENSION HARDENING	Specify hardening in tension for the gray cast iron plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CAVITY DEFINITION	Define a cavity for thermal radiation.	Interaction module	Abaqus/Standard
CECHARGE	Specify concentrated electric charges in piezoelectric analysis.	Load module	Abaqus/Standard
CECURRENT	Specify concentrated current in an electric conduction analysis.	Load module	Abaqus/Standard
CENTROID	Define the position of the centroid of the beam section.	Property module	Abaqus/Standard Abaqus/Explicit
CFILM	Define film coefficients and associated sink temperatures at one or more nodes or vertices.	Interaction module	Abaqus/Standard Abaqus/Explicit
CFLOW	Specify concentrated fluid flow.	Load module	Abaqus/Standard
CFLUX	Specify concentrated fluxes in heat transfer or mass diffusion analyses.	Load module	Abaqus/Standard Abaqus/Explicit
CHANGE FRICTION	Change friction properties.	Interaction module	Abaqus/Standard
CHARACTERISTIC LENGTH	Define characteristic element length at a material point.	Unsupported	Abaqus/Explicit
CLAY HARDENING	Specify hardening for the clay plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CLAY PLASTICITY	Specify the extended Cam-clay plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CLEARANCE	Specify a particular initial clearance value and a contact direction for the slave nodes on a surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
CLOAD	Specify concentrated forces and moments.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/Aqua
COHESIVE BEHAVIOR	Specify contact cohesive behavior properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
COHESIVE SECTION	Specify element properties for cohesive elements.	Property module	Abaqus/Standard Abaqus/Explicit
COMBINED TEST DATA	Specify simultaneously the normalized shear and bulk compliances or relaxation moduli as functions of time.	Property module	Abaqus/Standard Abaqus/Explicit
COMPLEX FREQUENCY	Extract complex eigenvalues and modal vectors.	Step module	Abaqus/Standard
COMPOSITE MODAL DAMPING	Specify composite modal damping for modal analyses based on the SIM architecture.	Unsupported	Abaqus/Standard
CONCRETE	Define concrete properties beyond the elastic range.	Property module	Abaqus/Standard
CONCRETE COMPRESSION DAMAGE	Define compression damage properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CONCRETE COMPRESSION HARDENING	Define hardening in compression for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CONCRETE DAMAGED PLASTICITY	Define flow potential, yield surface, and viscosity parameters for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CONCRETE TENSION DAMAGE	Define postcracking damage properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CONCRETE TENSION STIFFENING	Define postcracking properties for the concrete damaged plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CONDUCTIVITY	Specify thermal conductivity.	Property module	Abaqus/Standard Abaqus/Explicit
CONNECTOR BEHAVIOR	Begin the specification of a connector behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR CONSTITUTIVE REFERENCE	Define reference lengths and angles to be used in specifying connector constitutive behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR DAMAGE EVOLUTION	Specify connector damage evolution for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR DAMAGE INITIATION	Specify connector damage initiation criteria for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR DAMPING	Define connector damping behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR DERIVED COMPONENT	Specify user-defined components in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR ELASTICITY	Define connector elastic behavior.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR FAILURE	Define a failure criterion for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR FRICTION	Define friction forces and moments in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR HARDENING	Define the plasticity initial yield value and hardening behavior in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR LOAD	Specify loads for available components of relative motion in connector elements.	Load module	Abaqus/Standard Abaqus/Explicit
CONNECTOR LOCK	Define a locking criterion for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR MOTION	Specify the motion of available components of relative motion in connector elements.	Load module	Abaqus/Standard Abaqus/Explicit
CONNECTOR PLASTICITY	Define plasticity behavior in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR POTENTIAL	Specify user-defined potentials in connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR SECTION	Specify connector attributes for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR STOP	Specify connector stops for connector elements.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONNECTOR UNIAXIAL BEHAVIOR	Define uniaxial behavior in connector elements.	Interaction module	Abaqus/Explicit
CONSTITUENT	Define a constituent in the multiscale material.	Unsupported	Abaqus/Standard
CONSTRAINT CONTROLS	Reset overconstraint checking controls.	Unsupported	Abaqus/Standard
CONTACT	Begin the definition of general contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT CLEARANCE	Define contact clearance properties.	Unsupported	Abaqus/Explicit
CONTACT CLEARANCE ASSIGNMENT	Assign contact clearances between surfaces in the general contact domain.	Unsupported	Abaqus/Explicit
CONTACT CONTROLS	Specify additional controls for contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT CONTROLS ASSIGNMENT	Assign contact controls for the general contact algorithm.	Unsupported	Abaqus/Explicit
CONTACT DAMPING	Define viscous damping between contacting surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT EXCLUSIONS	Specify self-contact surfaces or surface pairings to exclude from the general contact domain.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT FILE	Define results file requests for contact variables.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
CONTACT FORMULATION	Specify a nondefault contact formulation for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT INCLUSIONS	Specify self-contact surfaces or surface pairings to include in the general contact domain.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT INITIALIZATION ASSIGNMENT	Assign contact initialization methods for general contact.	Interaction module	Abaqus/Standard
CONTACT INITIALIZATION DATA	Define contact initialization methods for general contact.	Interaction module	Abaqus/Standard
CONTACT INTERFERENCE	Prescribe time-dependent allowable interferences of contact pairs and contact elements.	Interaction module	Abaqus/Standard
CONTACT OUTPUT	Specify contact variables to be written to the output database.	Step module	Abaqus/Standard Abaqus/Explicit
CONTACT PAIR	Define surfaces that contact each other.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT PERMEABILITY	Specify fluid permeability contact property.	Unsupported	Abaqus/Standard
CONTACT PRINT	Define print requests for contact variables.	Unsupported	Abaqus/Standard
CONTACT PROPERTY ASSIGNMENT	Assign contact properties for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
CONTACT RESPONSE	Define contact responses for design sensitivity analysis.	Unsupported	Abaqus/Design
CONTACT STABILIZATION	Define contact stabilization controls for general contact.	Interaction module	Abaqus/Standard
CONTOUR INTEGRAL	Provide contour integral estimates.	Interaction module	Abaqus/Standard
CONTROLS	Reset solution controls.	Step module	Abaqus/Standard
CONWEP CHARGE PROPERTY	Define a CONWEP charge for incident waves.	Unsupported	Abaqus/Explicit
CORRELATION	Define cross-correlation properties for random response loading.	Unsupported	Abaqus/Standard
CO-SIMULATION	Identify that the current step is a co-simulation step in Abaqus.	Interaction module	Abaqus/Standard Abaqus/Explicit
CO-SIMULATION CONTROLS	Specify the coupling and rendezvousing scheme for co-simulation.	Interaction module	Abaqus/Standard Abaqus/Explicit
CO-SIMULATION REGION	Identify the interface regions in the Abaqus model and specify the fields to be exchanged during co-simulation.	Interaction module	Abaqus/Standard Abaqus/Explicit
COUPLED TEMPERATURE-DISPLACEMENT	Fully coupled, simultaneous heat transfer and stress analysis.	Step module	Abaqus/Standard
COUPLED THERMAL-ELECTRICAL	Fully coupled, simultaneous heat transfer and electrical analysis.	Step module	Abaqus/Standard
COUPLING	Define a surface-based coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
CRADIATE	Specify radiation conditions and associated sink temperatures at one or more nodes or vertices.	Interaction module	Abaqus/Standard Abaqus/Explicit
CREEP	Define a creep law.	Property module	Abaqus/Standard
CREEP STRAIN RATE CONTROL	Control loadings based on the maximum equivalent creep strain rate.	Unsupported	Abaqus/Standard
CRUSH STRESS	Define the crush stress of a material.	Unsupported	Abaqus/Explicit
CRUSH STRESS VELOCITY FACTOR	Define how the approach velocity at a crushing interface influences a material's resistance to crushing.	Unsupported	Abaqus/Explicit
CRUSHABLE FOAM	Specify the crushable foam plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CRUSHABLE FOAM HARDENING	Specify hardening for the crushable foam plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
CYCLED PLASTIC	Specify cycled yield stress data for the ORNL model.	Property module	Abaqus/Standard
CYCLIC	Define cyclic symmetry for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
CYCLIC HARDENING	Specify the size of the elastic range for the combined hardening model.	Property module	Abaqus/Standard Abaqus/Explicit
CYCLIC SYMMETRY MODEL	Define the number of sectors and the axis of symmetry for a cyclic symmetric structure.	Interaction module	Abaqus/Standard
D ADDED MASS	Specify distributed added mass in a FREQUENCY step.	Unsupported	Abaqus/Aqua
D EM POTENTIAL	Specify distributed surface magnetic vector potential.	Load module	Abaqus/Standard
DAMAGE EVOLUTION	Specify material properties to define the evolution of damage.	Property module	Abaqus/Standard Abaqus/Explicit
DAMAGE INITIATION	Specify material and contact properties to define the initiation of damage.	Property module	Abaqus/Standard Abaqus/Explicit
DAMAGE STABILIZATION	Specify viscosity coefficients for the damage model for fiber-reinforced materials, surface-based cohesive behavior or cohesive behavior in enriched elements.	Property module	Abaqus/Standard Abaqus/Explicit
DAMPING	Specify material damping.	Property module	Abaqus/Standard Abaqus/Explicit
DAMPING CONTROLS	Specify damping controls.	Supported in the Step module only for substructure generation.	Abaqus/Standard
DASHPOT	Define dashpot behavior.	Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, model connectors in the Interaction module.	Abaqus/Standard Abaqus/Explicit
DEBOND	Activate crack propagation capability and specify debonding amplitude curve.	Unsupported	Abaqus/Standard
DECHARGE	Input distributed electric charges for piezoelectric analysis.	Load module	Abaqus/Standard
DECURRENT	Specify distributed current densities in an electromagnetic analysis.	Load module	Abaqus/Standard
DEFORMATION PLASTICITY	Specify the deformation plasticity model.	Property module	Abaqus/Standard
DENSITY	Specify material mass density.	Property module	Abaqus/Standard Abaqus/Explicit
DEPVAR	Specify solution-dependent state variables.	Property module	Abaqus/Standard Abaqus/Explicit
DESIGN GRADIENT	Directly specify design gradients for design sensitivity analysis.	Unsupported	Abaqus/Design
DESIGN PARAMETER	Specify design parameters with respect to which sensitivities are calculated.	Unsupported	Abaqus/Design
DESIGN RESPONSE	Specify responses for design sensitivity analysis.	Unsupported	Abaqus/Design
DETONATION POINT	Define detonation points for a JWL explosive equation of state.	Property module	Abaqus/Standard Abaqus/Explicit
DFLOW	Specify distributed seepage flows for consolidation analysis.	Load module	Abaqus/Standard
DFLUX	Specify distributed fluxes in computational fluid dynamics and mass diffusion analyses and specify distributed fluxes and nonuniform concentrated fluxes in heat transfer analyses.	Load module	Abaqus/Standard Abaqus/Explicit
DIAGNOSTICS	Control diagnostic messages.	Unsupported	Abaqus/Standard Abaqus/Explicit
DIELECTRIC	Specify dielectric material properties.	Property module	Abaqus/Standard
DIFFUSIVITY	Specify mass diffusivity.	Property module	Abaqus/Standard
DIRECT CYCLIC	Obtain the stabilized cyclic response of a structure directly.	Step module	Abaqus/Standard
DISCRETE ELASTICITY	Specify effective elastic material properties for discrete particles.	Unsupported	Abaqus/Explicit
DISCRETE SECTION	Specify element properties for discrete elements.	Unsupported	Abaqus/Explicit
DISPLAY BODY	Define a part instance that will be used for display only.	Interaction module	Abaqus/Standard Abaqus/Explicit
DISTRIBUTING	Define a distributing coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
DISTRIBUTING COUPLING	Specify nodes and weighting for distributing coupling elements.	Unsupported; this option has been superseded by coupling constraints used in conjunction with the distributing option.	Abaqus/Standard
DISTRIBUTION	Define spatial distributions.	Property module	Abaqus/Standard Abaqus/Explicit
DISTRIBUTION TABLE	Define a distribution table.	Property module	Abaqus/Standard Abaqus/Explicit
DLOAD	Specify distributed loads.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/Aqua
DOMAIN DECOMPOSITION	Define a region for domain decomposition and/or define constraints on the domain decomposition.	Unsupported	Abaqus/Explicit
DRAG CHAIN	Specify parameters for drag chain elements.	Unsupported	Abaqus/Standard
DRUCKER PRAGER	Specify the extended Drucker-Prager plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
DRUCKER PRAGER CREEP	Specify a Drucker-Prager creep law and material properties.	Property module	Abaqus/Standard
DRUCKER PRAGER HARDENING	Specify hardening for Drucker-Prager plasticity models.	Property module	Abaqus/Standard Abaqus/Explicit
DSA CONTROLS	Set DSA solution controls.	Unsupported	Abaqus/Design
DSECHARGE	Input distributed electric surface charges for piezoelectric analysis.	Load module	Abaqus/Standard
DSECURRENT	Specify distributed current densities over a surface in an electromagnetic analysis.	Load module	Abaqus/Standard
DSFLOW	Specify distributed seepage flows normal to a surface.	Load module	Abaqus/Standard
DSFLUX	Specify distributed surface fluxes for heat transfer analysis.	Load module	Abaqus/Standard Abaqus/Explicit
DSLOAD	Specify distributed surface loads.	Load module	Abaqus/Standard Abaqus/Explicit
DYNAMIC	Dynamic stress/displacement analysis.	Step module	Abaqus/Standard Abaqus/Explicit
DYNAMIC TEMPERATURE-DISPLACEMENT	Dynamic coupled thermal-stress analysis using explicit integration.	Step module	Abaqus/Explicit
EL FILE	Define results file requests for element variables.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
EL PRINT	Define data file requests for element variables.	Unsupported	Abaqus/Standard
ELASTIC	Specify elastic material properties.	Property module	Abaqus/Standard Abaqus/Explicit
ELCOPY	Create elements by copying from an existing element set.	Not applicable; copying portions of sketches and instancing of parts serve similar purposes.	Abaqus/Standard Abaqus/Explicit
ELECTRICAL CONDUCTIVITY	Specify electrical conductivity.	Property module	Abaqus/Standard
ELECTROMAGNETIC	Electromagnetic response.	Step module	Abaqus/Standard
ELEMENT	Define elements by giving their nodes.	Mesh module	Abaqus/Standard Abaqus/Explicit
ELEMENT MATRIX OUTPUT	Write element stiffness matrices and mass matrices to a file.	Unsupported	Abaqus/Standard
ELEMENT OPERATOR OUTPUT	Write element operator output to a SIM document.	Unsupported	Abaqus/Standard
ELEMENT OUTPUT	Define output database requests for element variables.	Step module	Abaqus/Standard Abaqus/Explicit
ELEMENT PROGRESSIVE ACTIVATION	Define the element progressive activation feature and its properties.	Unsupported	Abaqus/Standard
ELEMENT RESPONSE	Define element responses for design sensitivity analysis.	Unsupported	Abaqus/Design
ELGEN	Incremental element generation.	Not applicable; elements are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit
ELSET	Assign elements to an element set.	Set toolset	Abaqus/Standard Abaqus/Explicit
EMBEDDED ELEMENT	Specify an element or a group of elements that lie embedded in a group of “host” elements in a model.	Interaction module	Abaqus/Standard Abaqus/Explicit
EMISSIVITY	Specify surface emissivity.	Interaction module	Abaqus/Standard
END ASSEMBLY	End the definition of an assembly.	Assembly module	Abaqus/Standard Abaqus/Explicit
END INSTANCE	End the definition of an instance.	Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis	Abaqus/Standard Abaqus/Explicit
END LOAD CASE	End the definition of a load case for multiple load case analysis.	Load module	Abaqus/Standard
END PART	End the definition of a part.	Part module	Abaqus/Standard Abaqus/Explicit
END STEP	End the definition of a step.	Step module	Abaqus/Standard Abaqus/Explicit
ENERGY FILE	Write energy output to the results file.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
ENERGY OUTPUT	Define output database requests for whole model or element set energy data.	Step module	Abaqus/Standard Abaqus/Explicit
ENERGY PRINT	Print a summary of the total energies.	Unsupported	Abaqus/Standard
ENRICHMENT	Specify an enriched feature and the properties of the enrichment.	Interaction module	Abaqus/Standard
ENRICHMENT ACTIVATION	Activate or deactivate an enriched feature.	Interaction module	Abaqus/Standard
EOS	Specify an equation of state model.	Property module	Abaqus/Explicit
EOS COMPACTION	Specify plastic compaction behavior for an equation of state model.	Property module	Abaqus/Standard Abaqus/Explicit
EPJOINT	Define properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
EQUATION	Define linear multi-point constraints.	Interaction module	Abaqus/Standard Abaqus/Explicit
EULERIAN BOUNDARY	Define inflow and outflow conditions at Eulerian mesh boundaries.	Load module	Abaqus/Explicit
EULERIAN MESH MOTION	Define the motion of an Eulerian mesh.	Load module	Abaqus/Explicit
EULERIAN SECTION	Specify element properties for Eulerian elements.	Property module	Abaqus/Explicit
EVENT SERIES	Define the event series data.	Unsupported	Abaqus/Standard
EVENT SERIES TYPE	Define the type of an event series.	Unsupported	Abaqus/Standard
EXPANSION	Specify thermal or field expansion.	Property module	Abaqus/Standard Abaqus/Explicit
EXTREME ELEMENT VALUE	Define element variables to be monitored.	Unsupported	Abaqus/Explicit
EXTREME NODE VALUE	Define nodal variables to be monitored.	Unsupported	Abaqus/Explicit
EXTREME VALUE	Define element and nodal variables to be monitored.	Unsupported	Abaqus/Explicit
FABRIC	Specify the in-plane response of a fabric material.	Unsupported	Abaqus/Explicit
FAIL STRAIN	Define parameters for strain-based failure measures.	Property module	Abaqus/Standard Abaqus/Explicit
FAIL STRESS	Define parameters for stress-based failure measures.	Property module	Abaqus/Standard Abaqus/Explicit
FAILURE RATIOS	Define the shape of the failure surface for a CONCRETE model.	Property module	Abaqus/Standard
FASTENER	Define mesh-independent fasteners.	Interaction module	Abaqus/Standard Abaqus/Explicit
FASTENER PROPERTY	Prescribe mesh-independent fastener properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
FIELD	Specify predefined field variable values.	Unsupported	Abaqus/Standard Abaqus/Explicit
FILE FORMAT	Specify format for results file output and invoke zero-increment results file output.	Unsupported; Abaqus/CAE does not use the results file.	Abaqus/Standard
FILE OUTPUT	Define output written to the results file.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Explicit
FILM	Define film coefficients and associated sink temperatures.	Interaction module	Abaqus/Standard Abaqus/Explicit
FILM PROPERTY	Define a film coefficient as a function of temperature and field variables.	Interaction module	Abaqus/Standard Abaqus/Explicit
FILTER	Define a filter and/or operator for output filtering and/or operating.	Filter toolset	Abaqus/Explicit
FIXED MASS SCALING	Specify mass scaling at the beginning of the step.	Step module	Abaqus/Explicit
FLEXIBLE BODY	Generate a flexible body from a substructure.	Unsupported	Abaqus/Standard
FLOW	Define seepage coefficients and associated sink pore pressures.	Unsupported	Abaqus/Standard
FLUID BEHAVIOR	Define fluid behavior for a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID BULK MODULUS	Define compressibility for a hydraulic fluid.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID CAVITY	Define a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID DENSITY	Specify hydrostatic fluid density.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID EXCHANGE	Define fluid exchange.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID EXCHANGE ACTIVATION	Activate fluid exchange definitions.	Unsupported	Abaqus/Explicit
FLUID EXCHANGE PROPERTY	Define the fluid exchange property for flow in or out of a fluid cavity.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID EXPANSION	Specify the thermal expansion coefficient for a hydraulic fluid.	Interaction module	Abaqus/Standard Abaqus/Explicit
FLUID FLUX	Change the amount of fluid in a fluid-filled cavity.	Unsupported	Abaqus/Standard Abaqus/Explicit
FLUID INFLATOR	Define a fluid inflator.	Unsupported	Abaqus/Explicit
FLUID INFLATOR ACTIVATION	Activate fluid inflator definitions.	Unsupported	Abaqus/Explicit
FLUID INFLATOR MIXTURE	Define gas species used for a fluid inflator.	Unsupported	Abaqus/Explicit
FLUID INFLATOR PROPERTY	Define a fluid inflator property.	Unsupported	Abaqus/Explicit
FLUID LEAKOFF	Define fluid leak-off coefficients for pore pressure cohesive elements.	Property module	Abaqus/Standard
FLUID PIPE CONNECTOR LOSS	Specify fluid pipe connector element loss.	Unsupported	Abaqus/Standard
FLUID PIPE CONNECTOR SECTION	Specify fluid pipe connector element section properties.	Unsupported	Abaqus/Standard
FLUID PIPE FLOW LOSS	Specify fluid pipe element loss.	Unsupported	Abaqus/Standard
FLUID PIPE SECTION	Specify fluid pipe element section properties.	Unsupported	Abaqus/Standard
FOUNDATION	Prescribe element foundations.	Interaction module	Abaqus/Standard
FRACTURE CRITERION	Specify crack propagation criteria.	Property module and Interaction module	Abaqus/Standard Abaqus/Explicit
FRAME SECTION	Specify a frame section.	Unsupported	Abaqus/Standard
FREQUENCY	Extract natural frequencies and modal vectors.	Step module	Abaqus/Standard Abaqus/AMS
FRICTION	Specify a friction model.	Interaction module	Abaqus/Standard Abaqus/Explicit
GAP	Specify clearance and local geometry for GAP-type elements.	Unsupported; similar functionality is available by modeling connectors.	Abaqus/Standard
GAP CONDUCTANCE	Introduce heat conductance between interface surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
GAP ELECTRICAL CONDUCTANCE	Specify electrical conductance between surfaces.	Unsupported	Abaqus/Standard
GAP FLOW	Define constitutive parameters for tangential flow in pore pressure cohesive elements.	Property module	Abaqus/Standard
GAP HEAT GENERATION	Introduce heat generation due to energy dissipation at the interface.	Interaction module	Abaqus/Standard Abaqus/Explicit
GAP RADIATION	Introduce heat radiation between surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
GAS SPECIFIC HEAT	Define reacted product's specific heat for an ignition and growth equation of state.	Property module	Abaqus/Explicit
GASKET BEHAVIOR	Begin the specification of a gasket behavior.	Property module	Abaqus/Standard
GASKET CONTACT AREA	Specify a gasket contact area or contact width for average pressure output.	Property module	Abaqus/Standard
GASKET ELASTICITY	Specify elastic properties for the membrane and transverse shear behaviors of a gasket.	Property module	Abaqus/Standard
GASKET SECTION	Specify element properties for gasket elements.	Property module	Abaqus/Standard
GASKET THICKNESS BEHAVIOR	Specify a gasket thickness-direction behavior.	Property module	Abaqus/Standard
GEL	Define a swelling gel.	Property module	Abaqus/Standard
GEOSTATIC	Obtain a geostatic stress field.	Step module	Abaqus/Standard
GLOBAL DAMPING	Specify global damping.	Supported in the Step module only for substructure generation.	Abaqus/Standard
HEADING	Print a heading on the output.	Job module	Abaqus/Standard Abaqus/Explicit
HEAT GENERATION	Include volumetric heat generation in heat transfer analyses.	Property module	Abaqus/Standard
HEAT TRANSFER	Transient or steady-state uncoupled heat transfer analysis.	Step module	Abaqus/Standard
HEATCAP	Specify a point capacitance.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
HOURGLASS STIFFNESS	Specify nondefault hourglass stiffness.	Mesh module	Abaqus/Standard
HYPERELASTIC	Specify elastic properties for approximately incompressible elastomers.	Property module	Abaqus/Standard Abaqus/Explicit
HYPERFOAM	Specify elastic properties for a hyperelastic foam.	Property module	Abaqus/Standard Abaqus/Explicit
HYPOELASTIC	Specify hypoelastic material properties.	Property module	Abaqus/Standard
HYSTERESIS	Specify a rate-dependent elastomer model.	Property module	Abaqus/Standard
IMPEDANCE	Define impedances for acoustic analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
IMPEDANCE PROPERTY	Define the impedance parameters for an acoustic medium boundary.	Interaction module	Abaqus/Standard Abaqus/Explicit
IMPERFECTION	Introduce geometric imperfections for postbuckling analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
IMPORT	Import information from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Supported for use in conjunction with part instances; importing selected part instances stored in an output database is supported using the File menu and importing the initial state of part instances is supported in the Load module.	Abaqus/Standard Abaqus/Explicit
IMPORT CONTROLS	Specify tolerances used in importing model and results data.	Unsupported	Abaqus/Standard Abaqus/Explicit
IMPORT ELSET	Import element set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
IMPORT NSET	Import node set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.	Unsupported	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE	Define incident wave loading for a blast or scattering load on a boundary.	Unsupported; this option has been superseded by incident wave interactions.	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE FLUID PROPERTY	Define the fluid properties associated with an incident wave.	Unsupported; this option has been superseded by incident wave interaction properties.	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE INTERACTION	Define incident wave loading for a blast or scattering load on a surface.	Interaction module	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE INTERACTION PROPERTY	Define the geometric data and fluid properties describing an incident wave.	Interaction module	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE PROPERTY	Define the geometric data describing an incident wave.	Unsupported; this option has been superseded by incident wave interaction properties.	Abaqus/Standard Abaqus/Explicit
INCIDENT WAVE REFLECTION	Define the reflection load on a surface caused by incident wave fields.	Unsupported	Abaqus/Standard Abaqus/Explicit
INCLUDE	Reference an external file containing Abaqus input data.	Several input data options in Abaqus/CAE provide the capability to reference external files; for example, the material editor can read material properties from an ASCII file.	Abaqus/Standard Abaqus/Explicit
INCREMENTATION OUTPUT	Define output database requests for time incrementation data.	Step module	Abaqus/Standard Abaqus/Explicit
INELASTIC HEAT FRACTION	Define the fraction of the rate of inelastic dissipation that appears as a heat source.	Property module	Abaqus/Standard Abaqus/Explicit
INERTIA RELIEF	Apply inertia-based load balancing.	Load module	Abaqus/Standard
INITIAL CONDITIONS	Specify initial conditions for the model.	Load module	Abaqus/Standard Abaqus/Explicit Abaqus/Aqua
INSTANCE	Begin an instance definition.	Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis	Abaqus/Standard Abaqus/Explicit
INTEGRATED OUTPUT	Specify variables integrated over a surface to be written to the output database.	Step module	Abaqus/Standard Abaqus/Explicit
INTEGRATED OUTPUT SECTION	Define an integrated output section over a surface with a local coordinate system and a reference point.	Step module	Abaqus/Standard Abaqus/Explicit
INTERFACE	Define properties for contact elements.	Property module; supported for two-dimensional, three-dimensional, and axisymmetric acoustic interface elements. Contact elements are not supported.	Abaqus/Standard
ITS	Define properties for ITS elements.	Unsupported; similar functionality (with the exception of friction) is available by modeling connectors.	Abaqus/Standard
JOINT	Define properties for JOINTC elements.	Unsupported; similar functionality is available by modeling connectors.	Abaqus/Standard
JOINT ELASTICITY	Specify elastic properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
JOINT PLASTICITY	Specify plastic properties for elastic-plastic joint elements.	Unsupported	Abaqus/Standard
JOINTED MATERIAL	Specify the jointed material model.	Unsupported	Abaqus/Standard
JOULE HEAT FRACTION	Define the fraction of electric energy released as heat.	Property module	Abaqus/Standard
KAPPA	Specify the material parameters for mass diffusion driven by gradients of temperature and equivalent pressure stress.	Property module	Abaqus/Standard
KINEMATIC	Define a kinematic coupling constraint.	Interaction module	Abaqus/Standard Abaqus/Explicit
KINEMATIC COUPLING	Constrain all or specific degrees of freedom of a set of nodes to the rigid body motion of a reference node.	Unsupported; this option has been superseded by coupling constraints used in conjunction with the kinematic option.	Abaqus/Standard
LATENT HEAT	Specify latent heats.	Property module	Abaqus/Standard Abaqus/Explicit
LOAD CASE	Begin a load case definition for multiple load case analysis.	Load module	Abaqus/Standard
LOADING DATA	Provide loading data for uniaxial behavior models in connectors or provide data from a uniaxial or a shear loading test for fabric materials.	Unsupported	Abaqus/Explicit
LOW DENSITY FOAM	Specify properties for a low-density foam.	Property module	Abaqus/Explicit
M1	Define the first bending moment behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
M2	Define the second bending moment behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
MAGNETIC PERMEABILITY	Specify magnetic permeability.	Property module	Abaqus/Standard
MAGNETOSTATIC	Magnetostatic analysis.	Unsupported	Abaqus/Standard
MAP SOLUTION	Map a solution from an old mesh to a new mesh.	Unsupported	Abaqus/Standard
MASS	Specify a point mass.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
MASS ADJUST	Adjust and/or redistribute the mass of an element set.	Unsupported	Abaqus/Explicit
MASS DIFFUSION	Transient or steady-state uncoupled mass diffusion analysis.	Step module	Abaqus/Standard
MASS FLOW RATE	Specify fluid mass flow rate in a heat transfer analysis.	Unsupported	Abaqus/Standard
MATERIAL	Begin the definition of a material.	Property module	Abaqus/Standard Abaqus/Explicit
MATRIX	Read in the stiffness or mass matrix for a linear user element.	Unsupported	Abaqus/Standard
MATRIX ASSEMBLE	Define stiffness, mass, or damping matrices for a part of the model.	Unsupported	Abaqus/Standard
MATRIX CHECK	Check the quality of the generated stiffness and mass matrices.	Unsupported	Abaqus/Standard
MATRIX GENERATE	Generate global or element matrices.	Unsupported	Abaqus/Standard
MATRIX INPUT	Read in a matrix for a part of the model.	Unsupported	Abaqus/Standard
MATRIX OUTPUT	Output generated matrices in various forms.	Unsupported	Abaqus/Standard
MEAN FIELD HOMOGENIZATION	Begin the definition of a multiscale material modeled with mean-field homogenization.	Unsupported	Abaqus/Standard
MEDIA TRANSPORT	Activate or deactivate a periodic media.	Unsupported	Abaqus/Explicit
MEMBRANE SECTION	Specify section properties for membrane elements.	Property module	Abaqus/Standard Abaqus/Explicit
MODAL DAMPING	Specify damping for modal dynamic analysis.	Step module	Abaqus/Standard
MODAL DYNAMIC	Dynamic time history analysis using modal superposition.	Step module	Abaqus/Standard
MODAL FILE	Write generalized coordinate (modal amplitude) data or eigendata to the results file during a mode-based dynamic or eigenvalue extraction procedure.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
MODAL OUTPUT	Write generalized coordinate (modal amplitude) data to the output database during a mode-based dynamic or complex eigenvalue extraction procedure.	Step module	Abaqus/Standard
MODAL PRINT	Print generalized coordinate (modal amplitude) data during a mode-based dynamic procedure.	Unsupported	Abaqus/Standard
MODEL CHANGE	Remove or reactivate elements and contact pairs.	Interaction module	Abaqus/Standard
MOHR COULOMB	Specify the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
MOHR COULOMB HARDENING	Specify hardening for the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
MOISTURE SWELLING	Define moisture-driven swelling.	Property module	Abaqus/Standard
MOLECULAR WEIGHT	Define the molecular weight of an ideal gas species.	Interaction module	Abaqus/Standard Abaqus/Explicit
MONITOR	Define a degree of freedom to monitor.	Step module	Abaqus/Standard Abaqus/Explicit
MOTION	Specify motions as a predefined field.	Unsupported	Abaqus/Standard
MPC	Define multi-point constraints.	Interaction module	Abaqus/Standard Abaqus/Explicit
MULLINS EFFECT	Specify Mullins effect material parameters for elastomers.	Property module	Abaqus/Standard Abaqus/Explicit
NCOPY	Create nodes by copying.	Not applicable; copying portions of sketches and instancing of parts serve similar purposes.	Abaqus/Standard Abaqus/Explicit
NETWORK STIFFNESS RATIO	Specify stiffness ratios for viscoelastic networks.	Unsupported	Abaqus/Standard Abaqus/Explicit
NFILL	Fill in nodes in a region.	Not applicable; nodes are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit
NGEN	Generate incremental nodes.	Not applicable; nodes are generated when you mesh the model.	Abaqus/Standard Abaqus/Explicit
NMAP	Map nodes from one coordinate system to another and rotate, translate, or scale the nodal coordinates.	Unsupported; meshing techniques in the Mesh module are usually preferable.	Abaqus/Standard Abaqus/Explicit
NO COMPRESSION	Introduce a compressive failure theory (tension only materials).	Property module	Abaqus/Standard
NO TENSION	Introduce a tension failure theory (compression only material).	Property module	Abaqus/Standard
NODAL ENERGY RATE	Define critical energy release rates at nodes.	Unsupported	Abaqus/Standard Abaqus/Explicit
NODAL THICKNESS	Define shell or membrane thickness at nodes.	Property module	Abaqus/Standard Abaqus/Explicit
NODE	Specify nodal coordinates.	Mesh module	Abaqus/Standard Abaqus/Explicit
NODE FILE	Define results file requests for nodal data.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard Abaqus/Explicit
NODE OUTPUT	Define output database requests for nodal data.	Step module	Abaqus/Standard Abaqus/Explicit
NODE PRINT	Define print requests for nodal variables.	Unsupported	Abaqus/Standard
NODE RESPONSE	Define nodal responses for design sensitivity analysis.	Unsupported	Abaqus/Design
NONLINEAR BH	Specify nonlinear magnetic behavior of a soft magnetic material.	Property module	Abaqus/Standard
NONSTRUCTURAL MASS	Specify mass contribution to the model from nonstructural features.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
NORMAL	Specify a particular normal direction.	Unsupported	Abaqus/Standard Abaqus/Explicit
NSET	Assign nodes to a node set.	Set toolset	Abaqus/Standard Abaqus/Explicit
ORIENTATION	Define a local axis system for material or element property definition, for kinematic coupling constraints, for free directions for inertia relief loads, or for connectors.	Property module, Interaction module, and Load module	Abaqus/Standard Abaqus/Explicit
ORNL	Specify constitutive model developed by Oak Ridge National Laboratory.	Property module	Abaqus/Standard
OUTPUT	Define output requests to the output database.	Step module	Abaqus/Standard Abaqus/Explicit
PARAMETER	Define parameters for input parametrization.	Unsupported	Abaqus/Standard Abaqus/Explicit
PARAMETER DEPENDENCE	Define dependence table for tabularly dependent parameters.	Unsupported	Abaqus/Standard Abaqus/Explicit
PARAMETER SHAPE VARIATION	Define parametric shape variations.	Unsupported	Abaqus/Standard Abaqus/Explicit
PARAMETER TABLE	Define the parameters in the parameter table.	Unsupported	Abaqus/Standard
PARAMETER TABLE TYPE	Define the type of parameter table.	Unsupported	Abaqus/Standard
PART	Begin a part definition.	Part module	Abaqus/Standard Abaqus/Explicit
PARTICLE GENERATOR	Specify a particle generator.	Unsupported	Abaqus/Explicit
PARTICLE GENERATOR FLOW	Specify flow speed and mass flow rate per unit inlet area for a particle species.	Unsupported	Abaqus/Explicit
PARTICLE GENERATOR INLET	Specify a particle generator inlet surface.	Unsupported	Abaqus/Explicit
PARTICLE GENERATOR MIXTURE	Specify particle generator species mixture.	Unsupported	Abaqus/Explicit
PERFECTLY MATCHED LAYER	Specify perfectly matched layer properties.	Unsupported	Abaqus/Standard
PERIODIC	Define periodic symmetry for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
PERIODIC MEDIA	Specify a periodic media.	Unsupported	Abaqus/Explicit
PERMANENT MAGNETIZATION	Specify permanent magnetization.	Unsupported	Abaqus/Standard
PERMEABILITY	Define permeability for pore fluid flow.	Property module	Abaqus/Standard
PHYSICAL CONSTANTS	Specify physical constants.	Model attribute	Abaqus/Standard Abaqus/Explicit
PIEZOELECTRIC	Specify piezoelectric material properties.	Property module	Abaqus/Standard
PIPE-SOIL INTERACTION	Specify element properties for pipe-soil interaction elements.	Unsupported	Abaqus/Standard
PIPE-SOIL STIFFNESS	Define constitutive behavior for pipe-soil interaction elements.	Unsupported	Abaqus/Standard
PLANAR TEST DATA	Used to provide planar test (or pure shear) data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
PLASTIC	Specify a metal plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
PLASTIC AXIAL	Define plastic axial force for frame elements.	Unsupported	Abaqus/Standard
PLASTIC M1	Define the first plastic bending moment behavior for frame elements.	Unsupported	Abaqus/Standard
PLASTIC M2	Define the second plastic bending moment behavior for frame elements.	Unsupported	Abaqus/Standard
PLASTIC TORQUE	Define the plastic torsional moment behavior for frame elements.	Unsupported	Abaqus/Standard
PML COEFFICIENT	Specify perfectly matched layer coefficients.	Unsupported	Abaqus/Standard
POROUS BULK MODULI	Define bulk moduli for soils and rocks.	Property module	Abaqus/Standard
POROUS ELASTIC	Specify elastic material properties for porous materials.	Property module	Abaqus/Standard
POROUS FAILURE CRITERIA	Define porous material failure criteria for a POROUS METAL PLASTICITY model.	Property module	Abaqus/Explicit
POROUS METAL PLASTICITY	Specify a porous metal plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
POST OUTPUT	Postprocess for output from the restart file.	Unsupported	Abaqus/Standard
POTENTIAL	Define an anisotropic yield/creep model.	Property module	Abaqus/Standard Abaqus/Explicit
PREPRINT	Select printout for the analysis input file processor.	Job module	Abaqus/Standard Abaqus/Explicit
PRESSURE PENETRATION	Specify pressure penetration loads with surface-based contact.	Interaction module	Abaqus/Standard
PRESSURE STRESS	Specify equivalent pressure stress as a predefined field for a mass diffusion analysis.	Unsupported	Abaqus/Standard
PRESTRESS HOLD	Keep rebar prestress constant during initial equilibrium solution.	Unsupported	Abaqus/Standard
PRE-TENSION SECTION	Associate a pre-tension node with a pre-tension section.	Load module	Abaqus/Standard
PRINT	Request or suppress output to the message file in an Abaqus/Standard analysis or to the status file in an Abaqus/Explicit analysis.	Step module	Abaqus/Standard Abaqus/Explicit
PROBABILITY DENSITY FUNCTION	Specify a probability density function.	Unsupported	Abaqus/Explicit
PROPERTY TABLE	Define the property table.	Unsupported	Abaqus/Standard
PROPERTY TABLE TYPE	Define the type of property table.	Unsupported	Abaqus/Standard
PSD-DEFINITION	Define a cross-spectral density frequency function for random response loading.	Unsupported	Abaqus/Standard
RADIATE	Specify radiation conditions in heat transfer analyses.	Interaction module	Abaqus/Standard Abaqus/Explicit
RADIATION FILE	Define results file requests for cavity radiation heat transfer.	Unsupported; Abaqus/CAE reads output from the output database file only.	Abaqus/Standard
RADIATION OUTPUT	Define output database requests for cavity radiation variables.	Step module	Abaqus/Standard
RADIATION PRINT	Define print requests for cavity radiation heat transfer.	Unsupported	Abaqus/Standard
RADIATION SYMMETRY	Define cavity symmetries for radiation heat transfer analysis.	Interaction module	Abaqus/Standard
RADIATION VIEW FACTOR	Control cavity radiation and view factor calculations.	Interaction module	Abaqus/Standard
RANDOM RESPONSE	Calculate response to random loading.	Step module	Abaqus/Standard
RATE DEPENDENT	Define a rate-dependent viscoplastic model.	Property module	Abaqus/Standard Abaqus/Explicit
RATIOS	Define anisotropic swelling.	Property module	Abaqus/Standard
REACTION RATE	Define the reaction rate for an ignition and growth equation of state.	Property module	Abaqus/Explicit
REBAR	Define rebar as an element property.	Unsupported	Abaqus/Standard Abaqus/Explicit
REBAR LAYER	Define layers of reinforcement in membrane, shell, surface, and continuum elements.	Property module; supported only for membrane and shell elements.	Abaqus/Standard Abaqus/Explicit
REFLECTION	Define reflection symmetries for a cavity radiation heat transfer analysis.	Interaction module	Abaqus/Standard
RELEASE	Release rotational degrees of freedom at one or both ends of a beam element.	Unsupported	Abaqus/Standard
RESPONSE SPECTRUM	Calculate the response based on user-supplied response spectra.	Step module	Abaqus/Standard
RESTART	Save and reuse data and analysis results.	Step module for saving restart data; Job module for performing a restart analysis	Abaqus/Standard Abaqus/Explicit
RETAINED NODAL DOFS	Specify the degrees of freedom that are to be retained as external to a substructure.	Load module	Abaqus/Standard
RIGID BODY	Define a set of elements as a rigid body and define rigid element properties.	Part module and Interaction module	Abaqus/Standard Abaqus/Explicit
RIGID SURFACE	Define an analytical rigid surface.	Part module	Abaqus/Standard
ROTARY INERTIA	Define rigid body rotary inertia.	Property module and Interaction module.	Abaqus/Standard Abaqus/Explicit
SECTION CONTROLS	Specify section controls.	Mesh module	Abaqus/Standard Abaqus/Explicit
SECTION FILE	Define results file requests of accumulated quantities on user-defined surface sections.	Unsupported	Abaqus/Standard
SECTION ORIGIN	Define a meshed cross-section origin.	Unsupported	Abaqus/Standard
SECTION POINTS	Locate points in the beam section for which stress and strain output are required.	Property module	Abaqus/Standard Abaqus/Explicit
SECTION PRINT	Define print requests of accumulated quantities on user-defined surface sections.	Unsupported	Abaqus/Standard
SELECT CYCLIC SYMMETRY MODES	Specify the cyclic symmetry modes in an eigenvalue analysis of a cyclic symmetric structure.	Interaction module	Abaqus/Standard
SELECT EIGENMODES	Select the modes to be used in a modal dynamic, complex eigenvalue extraction, or substructure generation analysis.	Supported in the Step module only for substructure generation.	Abaqus/Standard
SFILM	Define film coefficients and associated sink temperatures over a surface for heat transfer analysis.	Interaction module	Abaqus/Standard Abaqus/Explicit
SFLOW	Define seepage coefficients and associated sink pore pressures normal to a surface.	Unsupported	Abaqus/Standard
SHEAR CENTER	Define the position of the shear center of a beam section.	Property module	Abaqus/Standard Abaqus/Explicit
SHEAR FAILURE	Specify a shear failure model and criterion.	Unsupported	Abaqus/Explicit
SHEAR RETENTION	Define the reduction of the shear modulus associated with crack surfaces in a CONCRETE model as a function of the tensile strain across the crack.	Property module	Abaqus/Standard
SHEAR TEST DATA	Used to provide shear test data.	Property module	Abaqus/Standard Abaqus/Explicit
SHELL GENERAL SECTION	Define a general, arbitrary, elastic shell section.	Property module	Abaqus/Standard Abaqus/Explicit
SHELL SECTION	Specify a shell cross-section.	Property module	Abaqus/Standard Abaqus/Explicit
SHELL TO SOLID COUPLING	Define a surface-based coupling between a shell edge and a solid face.	Interaction module	Abaqus/Standard Abaqus/Explicit
SIMPEDANCE	Define impedances of acoustic surfaces.	Interaction module	Abaqus/Standard Abaqus/Explicit
SIMPLE SHEAR TEST DATA	Used to provide simple shear test data.	Property module	Abaqus/Standard Abaqus/Explicit
SLIDE LINE	Specify slide line surfaces on which deformable structures may interact.	Unsupported; the Interaction module uses surface-based contact.	Abaqus/Standard
SLOAD	Apply loads to a substructure.	Unsupported	Abaqus/Standard
SOFT ROCK HARDENING	Specify hardening for the soft rock plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
SOFT ROCK PLASTICITY	Specify the soft rock plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
SOFTENING REGULARIZATION	Specify softening regularization for the clay plasticity model and the soft rock plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
SOILS	Effective stress analysis for fluid-filled porous media.	Step module	Abaqus/Standard
SOLID SECTION	Specify element properties for solid, infinite, acoustic, particle, and truss elements.	Property module	Abaqus/Standard Abaqus/Explicit
SOLUBILITY	Specify solubility.	Property module	Abaqus/Standard
SOLUTION TECHNIQUE	Specify alternative solution methods.	Step module	Abaqus/Standard
SOLVER CONTROLS	Specify controls for the iterative and direct linear solvers.	Step module	Abaqus/Standard
SORPTION	Define absorption and exsorption behavior.	Property module	Abaqus/Standard
SPECIFIC HEAT	Define specific heat.	Property module	Abaqus/Standard Abaqus/Explicit
SPECTRUM	Define or create a response spectrum.	Amplitude toolset; supported only for defining a spectrum.	Abaqus/Standard
SPH SURFACE BEHAVIOR	Define boundary surface interaction properties between SPH particles and Lagrangian surfaces.	Unsupported	Abaqus/Explicit
SPRING	Define spring behavior.	Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, model connectors in the Interaction module.	Abaqus/Standard Abaqus/Explicit
SRADIATE	Specify surface radiation conditions in heat transfer analysis.	Interaction module	Abaqus/Standard Abaqus/Explicit
STATIC	Static stress/displacement analysis.	Step module	Abaqus/Standard
STEADY STATE CRITERIA	Specify steady-state criteria for terminating a quasi-static uni-directional simulation.	Unsupported	Abaqus/Explicit
STEADY STATE DETECTION	Specify steady-state requirements for terminating a quasi-static uni-directional simulation.	Unsupported	Abaqus/Explicit
STEADY STATE DYNAMICS	Steady-state dynamic response based on harmonic excitation.	Step module	Abaqus/Standard
STEADY STATE TRANSPORT	Steady-state transport analysis.	Unsupported	Abaqus/Standard
STEP	Begin a step.	Step module	Abaqus/Standard Abaqus/Explicit
SUBCYCLING	Define a subcycling zone.	Unsupported	Abaqus/Explicit
SUBMODEL	Specify driven boundary nodes in submodeling analysis.	Load module and model attribute	Abaqus/Standard Abaqus/Explicit
SUBSTRUCTURE COPY	Copy a substructure definition.	Unsupported	Abaqus/Standard
SUBSTRUCTURE DAMPING	Specify mass proportional and stiffness proportional damping for a substructure.	Unsupported	Abaqus/Standard Abaqus/AMS
SUBSTRUCTURE DAMPING CONTROLS	Specify damping controls for a substructure property.	Unsupported	Abaqus/Standard
SUBSTRUCTURE DELETE	Remove a substructure from the substructure library.	Unsupported	Abaqus/Standard
SUBSTRUCTURE DIRECTORY	List information about the substructures on a substructure library.	Unsupported	Abaqus/Standard
SUBSTRUCTURE GENERATE	Substructure generation analysis.	Step module	Abaqus/Standard
SUBSTRUCTURE LOAD CASE	Begin the definition of a substructure load case.	Unsupported	Abaqus/Standard
SUBSTRUCTURE MATRIX OUTPUT	Write a substructure's recovery matrix, reduced stiffness matrix, mass matrix, load case vectors, and gravity load vectors to a file.	Unsupported	Abaqus/Standard
SUBSTRUCTURE MODAL DAMPING	Specify damping for a substructure property.	Unsupported	Abaqus/Standard
SUBSTRUCTURE PATH	Enter into a substructure to obtain output or return back from a previously entered substructure.	Unsupported	Abaqus/Standard
SUBSTRUCTURE PROPERTY	Translate, rotate, and/or reflect substructures.	Unsupported	Abaqus/Standard
SUPERELASTIC	Define the data for the superelastic model.	Property module	Abaqus/Standard Abaqus/Explicit
SUPERELASTIC HARDENING	Specify hardening data for martensite.	Property module	Abaqus/Standard Abaqus/Explicit
SUPERELASTIC HARDENING MODIFICATIONS	Specify the stress-strain response of superelastic materials as a function of plastic strain.	Property module	Abaqus/Standard Abaqus/Explicit
SURFACE	Define a surface or region in a model.	Element-based surfaces are supported by the Surface toolset. Node-based surfaces are not supported; if node-based surfaces are imported into Abaqus/CAE, they are treated as sets.	Abaqus/Standard Abaqus/Explicit
SURFACE BEHAVIOR	Define alternative pressure-overclosure relationships for contact.	Interaction module	Abaqus/Standard Abaqus/Explicit
SURFACE FLAW	Define geometry of surface flaws.	Unsupported	Abaqus/Standard
SURFACE INTERACTION	Define surface interaction properties.	Interaction module	Abaqus/Standard Abaqus/Explicit
SURFACE PROPERTY	Define surface properties for cavity radiation.	Interaction module	Abaqus/Standard
SURFACE PROPERTY ASSIGNMENT	Assign surface properties to a surface for the general contact algorithm.	Interaction module	Abaqus/Standard Abaqus/Explicit
SURFACE SECTION	Specify section properties for surface elements.	Property module	Abaqus/Standard Abaqus/Explicit Abaqus/Aqua
SURFACE SMOOTHING	Define surface smoothing methods.	Interaction module	Abaqus/Standard
SWELLING	Specify time-dependent volumetric swelling.	Property module	Abaqus/Standard
SYMMETRIC MODEL GENERATION	Create a three-dimensional model from an axisymmetric or partial three-dimensional model.	Unsupported	Abaqus/Standard
SYMMETRIC RESULTS TRANSFER	Import results from an axisymmetric or partial three-dimensional analysis.	Unsupported	Abaqus/Standard
SYSTEM	Specify a local coordinate system in which to define nodes.	Not applicable; instancing a part in the Assembly module creates a local coordinate system.	Abaqus/Standard Abaqus/Explicit
TABLE COLLECTION	Transfer data from an input file to a user subroutine.	Unsupported	Abaqus/Standard
TEMPERATURE	Specify temperature as a predefined field.	Load module	Abaqus/Standard Abaqus/Explicit
TENSILE FAILURE	Specify a tensile failure model and criterion.	Unsupported	Abaqus/Explicit
TENSION CUTOFF	Specify tension cutoff data for the Mohr-Coulomb plasticity model.	Property module	Abaqus/Standard Abaqus/Explicit
TENSION STIFFENING	Define the retained tensile stress normal to a crack in a CONCRETE model.	Property module	Abaqus/Standard
THERMAL EXPANSION	Define the thermal expansion behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
TIE	Define surface-based tie and cyclic symmetry constraints or coupled acoustic-structural interactions.	Interaction module	Abaqus/Standard Abaqus/Explicit
TIME POINTS	Specify time points at which data are written to the output database file, or specify time points in the loading history at which the response of a structure will be evaluated in a direct cyclic analysis.	Step module	Abaqus/Standard Abaqus/Explicit
TORQUE	Define the torsional behavior of beams.	Unsupported	Abaqus/Standard Abaqus/Explicit
TORQUE PRINT	Print a summary of the total torque that can be transmitted across axisymmetric slide lines.	Unsupported	Abaqus/Standard
TRACER PARTICLE	Define tracer particles for tracking the location of and results at material points during a step.	Unsupported	Abaqus/Explicit
TRANSFORM	Specify a local coordinate system at nodes.	Define nodal coordinate systems for prescribed conditions in the Load module.	Abaqus/Standard Abaqus/Explicit
TRANSPORT VELOCITY	Specify angular transport velocity.	Unsupported	Abaqus/Standard
TRANSVERSE SHEAR STIFFNESS	Define transverse shear stiffness for beams and shells.	Property module	Abaqus/Standard Abaqus/Explicit
TRIAXIAL TEST DATA	Provide triaxial test data.	Property module	Abaqus/Standard Abaqus/Explicit
TRS	Used to define temperature-time shift for time history viscoelastic analysis.	Property module	Abaqus/Standard Abaqus/Explicit
UEL PROPERTY	Define property values to be used with a user element type.	Actuator/sensor interaction properties can be defined in the Interaction module.	Abaqus/Standard Abaqus/Explicit
UNDEX CHARGE PROPERTY	Define an UNDEX charge for incident waves.	Interaction module	Abaqus/Standard Abaqus/Explicit
UNIAXIAL	Characterize fabric materials through loading and unloading test data.	Unsupported	Abaqus/Explicit
UNIAXIAL TEST DATA	Used to provide uniaxial test data (compression and/or tension).	Property module	Abaqus/Standard Abaqus/Explicit
UNLOADING DATA	Provide unloading data for uniaxial behavior models in connectors or unloading data from uniaxial and shear tests for fabrics.	Unsupported	Abaqus/Explicit
USER DEFINED FIELD	Redefine field variables at a material point.	Property module	Abaqus/Standard Abaqus/Explicit
USER ELEMENT	Introduce a user-defined element type.	Actuator/sensor interactions can be defined in the Interaction module.	Abaqus/Standard Abaqus/Explicit
USER MATERIAL	Define material constants for use in subroutine UMAT, UMATHT, or VUMAT.	Property module	Abaqus/Standard Abaqus/Explicit
USER OUTPUT VARIABLES	Specify number of user variables.	Property module	Abaqus/Standard
VARIABLE MASS SCALING	Specify mass scaling during the step.	Step module	Abaqus/Explicit
VIEW FACTOR OUTPUT	Write radiation view factors to the results file in cavity radiation heat transfer analysis.	Unsupported	Abaqus/Standard
VISCO	Transient, static, stress/displacement analysis with time-dependent material response (creep, swelling, and viscoelasticity).	Step module	Abaqus/Standard
VISCOELASTIC	Specify dissipative behavior for use with elasticity.	Property module	Abaqus/Standard Abaqus/Explicit
VISCOSITY	Specify material shear viscosity.	Property module	Abaqus/Explicit
VISCOUS	Specify viscous material properties for the two-layer viscoplastic model.	Property module	Abaqus/Standard
VOID NUCLEATION	Define the nucleation of voids in a porous material.	Property module	Abaqus/Standard Abaqus/Explicit
VOLUMETRIC TEST DATA	Provide volumetric test data.	Property module	Abaqus/Standard Abaqus/Explicit
WAVE	Define gravity waves for use in immersed structure calculations.	Unsupported	Abaqus/Aqua
WIND	Define wind velocity profile for wind loading.	Unsupported	Abaqus/Aqua